General Forum

Re: Beo 4 question

The Stig - ver. 1.7 — Sat, 26 Apr 2008 17:53:39 GMT

did you try AV + TV ?

Re: Beo 4 question

beoguy — Thu, 24 Apr 2008 16:13:37 GMT

Thanks guys! No luck. When I point the remote directly to BC 9000, without first pressing AV, and use A AUX, it does enable the AUX on the BC9000.

However, when I try to go through the Beovision 6000, it just won't. I have tried AV + A AUX, AV+Link-AV, plus a couple of others that I can't remember. Any other suggestions? I'm going to try my Beolink 1000 and see what happens.

Guy

Re: Beo 4 question

Craig — Thu, 24 Apr 2008 14:12:37 GMT

When I had my BV3 connected to my Beocenter 9000. To get sound from the TV to play through the beocenter, I had to press Aux followed by 1,2,3 or 4. When you select Aux do the numbers 1,2,3,4, & 8 light up on the top panel? Numbeer 1 to 4 relate to different sources connected to the TV, and 8 opens up the microphone connection.

Craig

Re: Beo 4 question

TripEnglish — Wed, 23 Apr 2008 19:55:29 GMT

Not usually. The TV and the BeoCenter 9000 (I have this exact system in my office) will work together using AV commands issued before the source.

Program AV into LIST and then issue this command before TV. This has audio & video masters look to one another over datalink for signals.

To add commands to LIST:

1. Hold LIST and STANDBY (red dot) simultaneously until ADD? appears on the screen on the Beo 4

2. Press GO and use up and down keys to find the option you wish to add

3. Press go once you arrive at the option and it will be added to LIST

Good luck.

Beo 4 question

beoguy — Wed, 23 Apr 2008 19:21:28 GMT

How can I programme it to send the tv audio to my Beocenter 9000. I do have it connected via the datalink, and am able to call up the radio, cd, tape, atape 2, but not AUX?

Do I need to programme the tv?

Guy