General Forum

Re: Motorstand for MX6000 a bit off center

ChrDH — Mon, 14 Apr 2008 04:42:30 GMT

The problem is when I turn it off, then it mooves to a position a bit too far to the right.

br Chr.

Re: Motorstand for MX6000 a bit off center

mhw — Mon, 14 Apr 2008 04:27:56 GMT

When you turn it on, does it move to the correct position? Try press Store - Store, when you are in the Stand menu...

Re: Motorstand for MX6000 a bit off center

ChrDH — Mon, 14 Apr 2008 03:39:30 GMT

Unfurtunately, it had no effect, it still goes too far to the right.

br Chr.

Re: Motorstand for MX6000 a bit off center

ChrDH — Mon, 14 Apr 2008 03:37:02 GMT

Not a bad idea, will try that!:)

Re: Motorstand for MX6000 a bit off center

Jandyt — Mon, 14 Apr 2008 03:07:34 GMT

Hi Christian, hope your thesis went well.
I might be speaking through the top of my head here but, try moving the MX to the position you want it to park when off.
Then press 'Store' '0' 'Store'

Andy T.

Motorstand for MX6000 a bit off center

ChrDH — Mon, 14 Apr 2008 02:31:29 GMT

Hi there

I have been away for a while, among other things writing my masters thesis. But now I am back, at least until the hassle of working life gets to me.

I have just acquired a motor stand for my MX6000, and redone the hole setup, hanging the ouverture on the wall ect. All in all very nice, except that when the MX switches off, it turns to the centre position, and then a little bit further, so that it is actually not in the centre, but a bit off centre. Can this in any way be adjusted, and if so how? or am I just being fuzzy? My VX7000 underneath the MX makes is easy to se that the tv is turned a bit to the right then switched off. Help appreciated.

best regards

Christian