in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 01-29-2012 1:32 PM by akoro. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 01-29-2012 7:00 AM

    • c1010
    • Not Ranked
    • Joined on 04-18-2007
    • Posts 14
    • Bronze Member

    Beocenter 2 - No CD sound. But radio and DVD OK

     

     

     

    Setup: Beocenter 2 MK I on Beovision 7 MK IV with Beolink 1000 remote (previously Beo 5)

    When starting the cd there is no sound. If I shift to DVD on the remote there will be sound from the CD. But also TV-position and the screen is "alive" with a slight light.

    When starting a dvd there is sound and picture. As expected

    When starting radio there is sound. As expected

    This is both via thhe relote and drirectly on the Beocenter 2.

    The Beocenter 2 is set up as AV1 , DVD, Beocenter 2 MK I.

    I have tried to switch to AV3. Same reusult.

    I think the option is 2

     

     

     

  • 01-29-2012 10:05 AM In reply to

    Re: Beocenter 2 - No CD sound. But radio and DVD OK

    Presumably a ML problem; I presume the BC2 is ML connected? It should!

     

    if you don't have any speakers connected to the BC2 the option should be option 0


  • 01-29-2012 12:03 PM In reply to

    • c1010
    • Not Ranked
    • Joined on 04-18-2007
    • Posts 14
    • Bronze Member

    Re: Beocenter 2 - No CD sound. But radio and DVD OK

    Yes, it is ML connected

    The display on both TV and Beocenter is correct (stating CD). It is only the sound that is missing!

  • 01-29-2012 1:32 PM In reply to

    • akoro
    • Top 500 Contributor
    • Joined on 08-07-2008
    • Espoo, Finland
    • Posts 88
    • Gold Member

    Re: Beocenter 2 - No CD sound. But radio and DVD OK

    Is your A.OPT 0 and V.OPT 2? Any sound from headphone socket when using cd command?
Page 1 of 1 (4 items)