in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-03-2011 6:57 AM by brynhp. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 12-03-2011 4:05 AM

    • brynhp
    • Not Ranked
    • Joined on 05-02-2007
    • Posts 8
    • Bronze Member

    Beovision 7-32 and Humax STB

    My Beovision is about 5 years old and has the HD module fitted.  The picture is supplied by a Humax STB.  Usually when I switch the TV on first thing I get audio but no picture.  If I then turn the TV off and on again it is fine and works normally.  Not a big problem but irritating and I wonder if anyone knows why this happens.

  • 12-03-2011 5:15 AM In reply to

    Re: Beovision 7-32 and Humax STB

    At which point is the STB switched on (if you ever switch it off)? Does the picture appear if you cycle the STB off/on instead of the TV?

    -mika

  • 12-03-2011 5:19 AM In reply to

    • StUrrock
    • Top 500 Contributor
    • Joined on 02-04-2008
    • Cambridgeshire
    • Posts 219
    • Bronze Member

    Re: Beovision 7-32 and Humax STB

    In my experience this problem is usually one or all of the following;

    1. HDMI lead

    2. TV sofware

    3. The HD input board

     

  • 12-03-2011 6:57 AM In reply to

    • brynhp
    • Not Ranked
    • Joined on 05-02-2007
    • Posts 8
    • Bronze Member

    Re: Beovision 7-32 and Humax STB

    I leave the STB box on.  Switching it on and off doesn't solve the problem - only switching on and off the TV.

Page 1 of 1 (4 items)