in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-29-2011 11:10 AM by bluemike. 8 replies.
Page 1 of 1 (9 items)
Sort Posts: Previous Next
  • 02-27-2008 9:09 AM

    • majand
    • Not Ranked
    • Joined on 02-26-2008
    • Helsinki
    • Posts 72
    • Gold Member

    Avant and MPAV 9000

    Hi,

    another question about my new Avant.

    I might be able to obtain a MPAV 9000, or Master Panel AV9000. If my Avant had a surround unit attached to it, is it possible to connect that MPAV 9000 to my Avant? If so, do I need a Master Link cable or something which goes to some input sockets near Power Link sockets?

    And if the above is OK, can I control the whole set with Beo4, or do I need the Beolink 5000? 

    (I'm not near the Avant now, so can't check the sockets) 

    Thanks again,

    Pekka 

    Filed under:
  • 02-27-2008 9:12 AM In reply to

    Re: Avant and MPAV 9000

    I think the short answer is no, the software or drivers required to operate the MP are built into the AV9000.

    Someone will confirm for sure. 

  • 02-27-2008 11:18 AM In reply to

    Re: Avant and MPAV 9000

    You are correct mobe.
  • 02-27-2008 12:42 PM In reply to

    • Ulf
    • Top 100 Contributor
      Male
    • Joined on 04-17-2007
    • Germany
    • Posts 665
    • Bronze Member

    Re: Avant and MPAV 9000

    Sorry for not.

    it works, but no Display and settings....

    Only LOAD and LIGHT give a response.


    Ulf 

  • 02-28-2008 4:59 AM In reply to

    • majand
    • Not Ranked
    • Joined on 02-26-2008
    • Helsinki
    • Posts 72
    • Gold Member

    Re: Avant and MPAV 9000

    OK, so Beo4 won't work?

    But can I use the MPAV9000 directly, from buttons and get the sound out from Avant?

    Pekka 

  • 02-28-2008 5:14 AM In reply to

    • Ulf
    • Top 100 Contributor
      Male
    • Joined on 04-17-2007
    • Germany
    • Posts 665
    • Bronze Member

    Re: Avant and MPAV 9000

    No,

    Beo4 works but no Buttons and no Display at the MPAV
    Sound for all Sources RADIO,CD and TAPE works.

    Ulf 

  • 02-28-2008 3:43 PM In reply to

    • majand
    • Not Ranked
    • Joined on 02-26-2008
    • Helsinki
    • Posts 72
    • Gold Member

    Re: Avant and MPAV 9000

    Ulf, I'm a bit confused now, maybe, because I've never seen the MPAV in function.

    So, would it be a good idea to buy the thing to go with Avant? 

    In the Avant manual there is a device connected to Avant, which looks like MPAV, but might be some other device. Is there a better option?

    How about adding pair of Beolab 4000 into setup?

     

    I have to admit, that I've dropped off a bit from B&O development. My experience and love to B&O dates to my trustworthy Beomaster 1900-2 and Beovision 601 era.

     

    Pekka 

  • 02-28-2008 3:58 PM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: Avant and MPAV 9000

    majand:

    In the Avant manual there is a device connected to Avant, which looks like MPAV, but might be some other device. Is there a better option?

    What you can see is the manual is probably a Beosound Ouverture. This is what the MPAV9000 is based on.

    BEOSOUND OUVERTURE

     

    CraigSmile

     

     

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 04-29-2011 11:10 AM In reply to

    Re: Avant and MPAV 9000

    did you manage to hock up the mpav9000 to your avant?

    if so how???

     

    thx

     

    /m

Page 1 of 1 (9 items)