in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 11-08-2010 3:34 PM by pauel. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 11-08-2010 4:40 AM

    BV MX 4002 öffnen

    Hallo,

    weiß jemand, wie man ein BV MX 4002 öffnet? Ich will nur checken, ob der ML Modul richtig sitzt. Kann man da auch einen STB Controller einbauen?

    Schöne Grüße

     

    tecnicus

  • 11-08-2010 10:35 AM In reply to

    • pauel
    • Top 200 Contributor
      Male
    • Joined on 04-14-2008
    • Hamburg, Germany
    • Posts 332
    • Gold Member

    Re: BV MX 4002 öffnen

    Hö?? Big Smile

     

    Hinten:

     

    4 Schrauben im Gehäuse.... sollten TORX sein....

     

    Eine oben links, eine oben rechts, eine unten links, eine unten rechts.

     

    Rausdrehn & Gehäusedeckel abnehmen......

    My BEO: ...BeoVision AV5, BeoVision 32RF VHS, BeoCenter 1, BeoSystem 7000 full/black, BeoLab 2000, BeoLab 3500, BeoLab 5000, BeoLab 6000, BeoLab 8000, 4xBeoLab Penta MK3, LC1, LC2, BeoCom 6000, BeoCom 2, BeoCom 4, Beolink 1000,4,5,5000, 7000...

  • 11-08-2010 3:30 PM In reply to

    Re: BV MX 4002 öffnen

    Achso. es sah so aus, als ob das Gehäuse aus 2 Teilen besteht. Das lakcierte Teil und das hinter der Röhre. Hab mich daher nicht so getraut.

    Danke für die Info.

    Schöne Grüße

    tecnicus

     

  • 11-08-2010 3:34 PM In reply to

    • pauel
    • Top 200 Contributor
      Male
    • Joined on 04-14-2008
    • Hamburg, Germany
    • Posts 332
    • Gold Member

    Re: BV MX 4002 öffnen

    ....stimmt ja auch.... hängt aber zusammen...;-)

    My BEO: ...BeoVision AV5, BeoVision 32RF VHS, BeoCenter 1, BeoSystem 7000 full/black, BeoLab 2000, BeoLab 3500, BeoLab 5000, BeoLab 6000, BeoLab 8000, 4xBeoLab Penta MK3, LC1, LC2, BeoCom 6000, BeoCom 2, BeoCom 4, Beolink 1000,4,5,5000, 7000...

Page 1 of 1 (4 items)