once connected,When i will press "CD" on beo4 will it automatically recognize the beocenter? 

thx 

andrea

Hi Andrea,

you will need a 'new' BeoLink Converter, a MasterLink cable, a fully wired PowerLink cable, and an Aux/Datalink cable to hook those 2 together.  You will want to set the 9300 to Audio Option 0 and the BS-3 to Video Option 2.  Everything should be fine from there.

Good luck!

andreabang:

When i will press "CD" on beo4 will it automatically recognize the beocenter? 

Yes!

Hello

Funny enough i come one here to ask the same exact question but connecting a Beocenter 9300 to a BV7.

so what is the difference with the beolink convertor 1611 and 1614.

If I remember correctly 1614 is a earlier version - you will need 1611. There is also a 1610 for AV9000 and a 1615, called Beolink Video.

Stefan

Note that you lose 2 way control, if you have a Beolink 5000 or 7000.

Sorry, BC9300 is no two way system.

Stefan

Hello

So i need to get the beolink convertor 1611 for use with the 9300.
I have never had a two way system so i am not going to miss anything.

@PhilLondon

Will I also loose 2 way control via MCL? (I have a BeoSystem 7000 wich i plan to link via Beolink 1611 to a BV8, the Beosystem have also a MCL to a bedroom). Dont mind to loose 2 way in mainroom but wonder if 2 way will still work in bedroom (linkroom via MCL)?

Thanx in advance

Jesper

Sweden

You do not loose 2 way from MCL Link rooms.

You only loose 2 way in the main room if you connect all speakers to the TV and set the TV to option 2. But this is still the recommended setup.

p.

Oh, ok hmm think i really want my Beolab Penta 3 connected to BS7000 since they will be 98% of the time only be used for music, and maybe now and then used as "movie-speakers".

Again thanks for the information :D

Jesper 

Sweden