in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 07-02-2007 4:52 AM by Max. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next
  • 07-01-2007 1:15 PM

    • h1npw
    • Top 75 Contributor
    • Joined on 04-16-2007
    • A cricket ball throw from Trent Bridge
    • Posts 776
    • Founder

    7 pin DIN to Phono lead

    Does anyone know where I can get hold of the above (if such a thing exists) so I can connect a Beocord 6500 to a non B&O amp with phono RCA sockets ?

    Cheers

    Nigel 

  • 07-01-2007 1:17 PM In reply to

    Re: 7 pin DIN to Phono lead

    You need a 5 pin socket to 4 RCA lead. Unscrew pin 6 and 7 as you will not need these. Maplin do the lead you want but they are commonly available.
  • 07-02-2007 4:52 AM In reply to

    • Max
    • Not Ranked
    • Joined on 04-19-2007
    • Devon
    • Posts 64
    • Founder

    Re: 7 pin DIN to Phono lead

    As an alternative, try http://www.flashbacksales.co.uk/acatalog/5_Pin_DIN___Phono_Cables.html. I used a 5 pin to 4 RCA cable with my BS3200 and it seemed a little bit more robust than others I found.

    My B&O is in my Bio.

Page 1 of 1 (3 items)