ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
The contrast of my BV8-32 is far to low when I watch TV in darkness; how can I switch of this auto-contrast feature? It is not possible in the regular menu; can anyone give me a code for the service menu?
thanx in advance from Amsterdam,
Frank
I would use ...
First B&O (1976) was a Beogram 1500 ... latest (2011) change has been to couple the BL11 with the BL6Ks *sounds superb*
iThank you for your reply. I tried it, but I nothing happens after I pushed the zero's in step 5 and 6; I can't enter this 'Monitor-menu.
It is a BV 8-32, perhaps the discribed steps are the BV8-40?
I've heard that there is a servicecode for the bv8-32; can anyone help me with that?
Thanks in advance,
I have a BV8-32 myself.
I just repeated the instructions shown above.
They worked for me.
The important thing is to scroll down to CONNECTIONS but do *NOT* press (GO), press 0, then 0 again, then (GO).
I hope that helps ....
Something was wrong with my remote control, but by using the one from my other tv, it works!
I switched the auto-contrast mode Off and the picture is now, even in darkness, clear enough to enjoy.
mr. Elephant, thank you so much for your help!
A pleasure - glad you have got there !
Shows that even when one needs only one remote ("to rule them all") that it pays to have a back-up/spare !