in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-05-2009 2:19 PM by jooka. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 12-04-2009 9:29 AM

    • Olof
    • Top 500 Contributor
    • Joined on 05-12-2007
    • Posts 141
    • Bronze Member

    Is the sum of BeoLab 2 + BeoLab 3 better than their single performance ?

    I have the feeling that high frequencys of the BL 3 sound clearer if it works together with a BL 2. Can anybody confirm this ?

  • 12-04-2009 9:50 AM In reply to

    Re: Is the sum of BeoLab 2 + BeoLab 3 better than their single performance ?

    The high frequencies should not really change but the midrange should. This could make the speakers sound clearer. The Beolab 3 would no longer have to reproduce the bass notes (at least the lowest ones) so the drive unit will be able to be used more as a midrange unit.

  • 12-05-2009 1:35 PM In reply to

    Re: Is the sum of BeoLab 2 + BeoLab 3 better than their single performance ?

    There is what "should" happen and what really does. When I listen to music on my BC2 - BL3 - BL2 combination and the speakers are connected through my BV8 it sounds dull and much clarity is gone. When I connect them direct to the BC2 it matches the performance that I was used to when I ran my BS9000 with these speakers.

    For your observation I would be interested what the entire setup is.

    BS9000, BS2300, BC2, BL2500, BL3, Bl2, BS1, BV8, BC4, A8

  • 12-05-2009 2:19 PM In reply to

    Re: Is the sum of BeoLab 2 + BeoLab 3 better than their single performance ?

    jk1002:

    There is what "should" happen and what really does. When I listen to music on my BC2 - BL3 - BL2 combination and the speakers are connected through my BV8 it sounds dull and much clarity is gone. When I connect them direct to the BC2 it matches the performance that I was used to when I ran my BS9000 with these speakers.

    i have very similar experiences with bv6. bass is not so deep and tight when connected on back of tv, but when you connect everything on the back of bs3000 - it's tight and clear. 

     

Page 1 of 1 (4 items)