in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Tracking force for MMC1
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 01-23-2009 1:24 PM by Medogsfat. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next

  • 01-23-2009 9:23 AM

    Tracking force for MMC1

    Reply Contact

    I just picked up a mint looking Beogram 1800 with a very little used mmc1.  What is the reccomended tracking force for this combo?

    Thanks,

    Ed in Michigan

  • 01-23-2009 11:14 AM In reply to

    • Medogsfat
    • Top 10 Contributor
      Male
    • Joined on 02-21-2007
    • *Moderator* Leeds, Yorkshire
    • Posts 4,045
    • Founder

    Re: Tracking force for MMC1

    Reply Contact

    Hi Ed - nice findSmile

    The recommended tracking force for the MMC1 is 1.0 g but if it is worn you may need to "up" it a little. I personally wouldn't go above 1.5 g though as this is the point where you should really be looking to replace the cartridge.

    HERE'S how to set the tracking correctly on a Beogram 1800 if you're unsure.

     

    Chris.

    The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

  • 01-23-2009 1:22 PM In reply to

    Re: Tracking force for MMC1

    Reply Contact

    Thanks for all the replys.  Everything is all set.

     

    Ed

  • 01-23-2009 1:24 PM In reply to

    • Medogsfat
    • Top 10 Contributor
      Male
    • Joined on 02-21-2007
    • *Moderator* Leeds, Yorkshire
    • Posts 4,045
    • Founder

    Re: Tracking force for MMC1

    Reply Contact

    No problem Ed, and thank you for supporting Beoworld with your silver membership it is really appreciatedSmile

     

    Chris.

    The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.
Page 1 of 1 (4 items)