ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
I need to make a IR receiver cable for a BeoLink Passive unit; but can't find any information regarding the pin layout for the DIN7. Any one able to point in the right direction?
You may find the following helpful
Regards Keith....
Or this one:
http://www.muellerleipzig.de/Download/Stecker-BL-Sensor.jpg
/Räuber
Raeuber: Or this one: http://www.muellerleipzig.de/Download/Stecker-BL-Sensor.jpg /Räuber
Exactly what I was looking for, thanks Räuber!
B&O item 1, B&O item 2, B&O item 3,...................B&O item 735
Beovirus? What's that?
Hi Keith & Räuber ,
Thanks for both replies; as I'm having an IR kit from B&O I assume that Räuber's suggestion is the way to go.
Keith what you're suggesting with the schematics; to be used together with the B&O IR kit?
My image is from the circuit diagram which shows the pin connections which is the same connections as shown in Räuber's image.
The wiring to the Control is shown in the user manual