ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
A few years ago I inherited an Avant, which together with an Ouverture with Beolab 2000 speakers, was controlled by a Beo4. All worked very well.
I have now replaced the Avant, and separated the system. The old Avant is now in our other house, and works just fine with the Beo4. But I can no longer control the Ouverture and its speakerswith the Beo4.
Is this a setup problem (I never did have the manuals)?
Your Ouverture is set to option 0 when it should be option1.
Press STDBY and LIST together
then LIST until display reads OPTIONS, press go.
then LIST until display reads AOPT, press 1
Now check operation of Beo4
Regards Graham
Thank you, that has done the trick. Your prompt and informative reply has saved the day, and I can now use my Ouverture with the Beo4. It only remains for me to replicate the remote with a £6.99 Lidl Universal that I have purchased this afternoon and tried out with the basic commands.
Fabulous, thank you again.
OMG!
Ouverture =
Beo4 =
Avant =
£6.99 Lidl Universal =
Like a cherry on a Black Pudding!
Get a used Beolink 1000 off eBay for next to nowt!
PS, welcome to Beoworld!
Andy T.
Poor me, never win owt!