I have one strange question.

My setup is like this: Bs2300-masterlink via converter to BC1 - BC1 digital back to Bl8000.

And everything working fine but ....

1. When I start tv, or CD or any source it turns on and by the default volume is 64 ! realy loud and unpleasant....

How can I program it when I start any source for some other volume ?

2. When I start tv-BC1 is automacly turns setup for speakers2 which means that BL8000 start to working.

How can I setup to start for the speakers setup 1 or 2 or 3 ?

3. On BL8000 switch unernith powerlink soket is set on middle position and working well but when I try to set L or R in some position speaker dot get signal ....

one more thing ...

When I pres radio bought radio on BS2300 and BC1 is on ... can I control which radio to turn on ?

THANK YOU !

1. Set the system to the volume you want it to start at and then press Go on the Beo4. That sets the start up volume.

2. I think it will default to this setting.

3 Make sure you have L speakers set to the L socket on the TV. But I don't really understand this as it should just involve setting the speaker to L and R.

4. Yes. Menu, TV SETUP, Options, Beolink, and then set Linked Radio to Yes.

Peter :

1. Set the system to the volume you want it to start at and then press Go on the Beo4. That sets the start up volume.

2. I think it will default to this setting.

3 Make sure you have L speakers set to the L socket on the TV. But I don't really understand this as it should just involve setting the speaker to L and R.

4. Yes. Menu, TV SETUP, Options, Beolink, and then set Linked Radio to Yes.

Thank you Peter for your ansfer.

1. I didt it, when tv is on I setup wolume for 20 and than press go, but nothing .... again the same, volume starts up on 63! maybe I did something wrong.

4. Yes my beolink is set to Linked Radio Yes, but again when I pres radio bouth radio is turning on...

My BC1 is on option 2 and BS2300 option 0.

1. is solved ! I didn't realized that I need to go to TV menu.

This is my first link setup so I'm little bit confused ....

Peter :

 

2. I think it will default to this setting.

 

Can I change this default settings ?