Hello

 

I am new hire and have less experience with B&O looking for help!!

Have a BeoSound 4 with speakers and BeoVísion connected with a MasterLink cable and a Beo4 remote control.

I am able to send the radio sound to the TV by using the Beo4 Key <List> until AV is in the display followed by the key <Radio>. Then the TV switched on (without screen) and Speakers playing radio music. So far so good.

A friend of me is DJ and we connected his equipment to BeoSound4 to AUX-in, with Beo4 switch to with key <List> A.AUX , then the standard speaker worked fin. I do not find any key combination to redirect the A.AUX sound to the TV as I can do it with the radio.
Dose anybody know the Beo4 key combination?

Thank you

I´m quite sure it is not possible. Of some reason B&O have not been thinking of that scenario. 

Depending on the version of your Beo4 - does it have a A-Tape button (under the Cd button)?

If so, try List AV then A-Tape.

I'll see if I can find another key combination.

Hi petermc

my beo4
has

TV      Light     Radio
DTV     DVD      CD
V.Mem Record A.MEM

 

Thx

 

As both the "AV" and "A.AUX" commands are accessed via the list button on the Beo4 remote control, I don't think it is posible to acheive what you are trying to do. However a Beo5 or Beo6 could have a button created that could send the command "AV - A.AUX". That would do the trick.

Opman

AV A.MEM will do the trick

Carolpa:

AV A.MEM will do the trick

Won't that select the SD card on the BeoSound4 rather than the A.AUX socket?

Opman

 

your right; didn't think about the SD

the machines with only a CD like the BS3000 and the BS9000 the commands ATAPE and PHONO open the AUX input

so he should try the AV PHONO instead

Hi

 

Thank you for all the answers :-)

with the remote control Beo4 it is definitely not possible to get this done!

I got an other solution, connect the external device to the BeoVison and use the v.Mem. Then I can redirect the sound to all speakers.

regards

riegado