Hi,

I'm trying to help a friend with his B&O setup.

He owns an Ouverure which he uses with a pair of Beolab 6000 and a Beolink 1000 controller.

He now wants to set up sound in a second room using a ML/MCL connected via Masterlink + using a X-tra speaker kit. We have light in the IR panel, and the mute button makes the relay click in the X-tra box, but nothing more???

Any guidance from the Beoworld would be much appreciated.

Cheers

Have you checked all the MCL wiring?  That was the problem with the set up at this link: http://forum.beoworld.org/forums/t/41582.aspx

Pressing the MUTE button should activate your Ouverture.

Does the light flash, if you press a button on your remote control? Beo4? BL1000?

Did you check the option setting? Should be set to L.OPT 1 or 2.

Stefan

Thanks,

Will re-check the wirering next time.

In this case, there is no reaction at all to the BL1000 at the transciever - not even a flickering in the LED. Only when pushing mute on the panel there is a reaction in the relay in the X-tra box.

We have had the speakers connected directly to the ML/MCL and the masterlink to the Ouverture, no sound from the extra speakers at all - should there have been any sound ?

Can the ML/MCL be faulty ?

We tried different combinations of Link 1 / 2 and Store, directed to the Ouverture, nothing happend. Guess I will have to consult the Ouverture manual for additional info to understand how to setup?

Sorry. You have to direct option setting to MCL in the link room.

Press LINK - 1 - STORE when directing the BL1000 to the IR eye of the MCL. It now should flash.

Stefan