in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Beovision 6-26 blinking standby light...
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-29-2010 10:33 AM by beoguy. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next

  • 12-29-2010 8:50 AM

    Beovision 6-26 blinking standby light...

    Reply Contact

    Ok...so as I am trying to fiqure out how to hook up my Blu-ray player to this, I have been plugging cables in and out, here and there.  Now whaen the tv is off, the red standby light blinks!

    What does this mean?

    Guy

  • 12-29-2010 9:22 AM In reply to

    • Spiros
    • Top 50 Contributor
      Male
    • Joined on 09-03-2007
    • Thessaloniki GREECE
    • Posts 1,088
    • Gold Member

    Re: Beovision 6-26 blinking standby light...

    Reply Contact
    I think you need to put the PIN to the TV!

    Best regards

    Spiros

  • 12-29-2010 9:38 AM In reply to

    Re: Beovision 6-26 blinking standby light...

    Reply Contact

    I have the same problem on BV7, has nothing to do with the pincode, so I'm hoping for an other answer...

  • 12-29-2010 9:52 AM In reply to

    • Vienna
    • Top 100 Contributor
    • Joined on 08-15-2008
    • make an educated guess
    • Posts 712
    • Bronze Member

    Re: Beovision 6-26 blinking standby light...

    Reply Contact

    Press "TV" or "DTV/SAT" and see if the screen for entering the PIN is displayed,

    if yes, key in PIN

    if not, switch TV to stby and UNPLUG power for approx 5 min,
    before reconnecting to the mains again.

  • 12-29-2010 10:33 AM In reply to

    Re: Beovision 6-26 blinking standby light...

    Reply Contact

    Great!  Unplugging it for a while and plugging it in did the trick!  Thanks!

    Guy
Page 1 of 1 (5 items)