Hi,

I have the PCG (Product Configuration Guide) but can't seem to figure out why I can't get a BV7-40 (Mk2) and Beolink PC2 to work together as an N.Music Source.

I always thought V.Opt 2 on the BV and Opt 4 for the BeoPort Config. I dont seem to be able to control anything, I'm pretty certain I've done this before on a BV7-32 without an N.Music compatable audio source. It's been such a long time since I messed around with this stuff, I've fortton. Any help would be great.

Thx.

10

As far as I know the BV7 should be set to V.OPT 2 and Beoport - if it`s the audiomaster - to A.OPT 0.  N.Music will be controled via the BV. Do you want to use Beoport in combination with your BS5?

Stefan

Hi Stefan,

Thanks for the effort. I have tried this previously and it didnt work. However, I just found an old email from a Dealer query on this from 2006. Apparently the answer V.Opt 6 and A.Opt 2 which I will try to verify tomorrow. The PC2 will work in a separate system to the BV7/BS5 combo so hence dusting-off the old gear. 

Cheers.

10