ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
Is it possible to use two 1611 converters in the same setup? I propose to use BV7mk2>1611>BC9500>MCL Xtra TV>1611>Avant 32 DVD.
The PCG does not list the Avant as a possible link TV when using the MCL system.
David
Probably not!
the more " obvious" connections would be:
BV7>ml>Avant
>ml>1611>BC9500
david707: Is it possible to use two 1611 converters in the same setup? I propose to use BV7mk2>1611>BC9500>MCL Xtra TV>1611>Avant 32 DVD. The PCG does not list the Avant as a possible link TV when using the MCL system. David
Interesting. I assume you want to integrate local audio sources in the link room..(?) I dont know why it should not work. I had a mixed ML / MCL system with a 1610 converter and a BL video years ago.
Stefan
I can integrate a local audio source in the link room but don't use that facility. I have Avant 32 DVD>1611>BC9500>MCL>Xtra TV>LX5500 and it all works well. (why change it??) I would use the Avant in the link room with a BV7 (or BV10) as master but retaining the MCL as it would be difficult to re-wire.
Ok. If you can set the Avant to V.OPT 6 it should work. So I would check it out. Good luck.
Thanks Carolpa & Stefan for the helpful replies.