Dear All:

What's the latest version of the BV 7 MkIII software?  The area's only B&O certified technicians upgraded the SW to day to V 4.71.  Is this the latest version?  If not am I going to encounter any issues?

Thank you,

Dario 

Yes, the latest is 5.02. With black menus and support for Beomaster 5.

Stefan 

Thank you everyone.  The BS 9K was taken away for some repairs.  I will ask the technician next time he is in to update to the latest SW.  Although, I doubt I will be getting the BS 5.  

The idea is good; the amount of HD space is just poor.  The thing needs at minimum  1 terabyte of space.  

Dario 

Latest SW is 5.04, build 435, released yesterday.

I have 5.02 but over the xmas break discovered if you watch sky in link room when the main tv(beovision 7) is turned off the link room tv displays message this display does not support hdcp. B&O tell me there was new software on the way to fix this problem with 5.02.

Do you know if 5.04,build 435 fixes this problem and what other changes there are? thanks

Paul, if you find out this info, let me know. As you know, I share the dodgy link room problem :(

Unfortunately my dealer seems to be on a sales drive and isn't getting back to me with any info about this problem. More fool them.

Quim,

 is the software level the same for BV7-32 and BV7-40 (both MK-III I suppose)?

And if not, what is the software level for BV7-32? 

Piet

Piet,

The lastest SW for the BV7-32 Mk3 is 7.84 for the TV SW and 7.74 for M2 SW.

SW 5.04 is for BV7-40 Mk3, BV9, BV4 and Beosystem 3 with DVB HD.

Thanks Quim,

I have ordered a BV7-32 to replace my Avant 28" (50 Hz type). I can't wait.........I have to wait; it will be delivered after january 15.

Piet

Quim

What is the latest software release for the BV7-40 mark ii?  As far as I am aware, I have not had any sw upgrades installed.  Do I need to worry?

The lastest SW for the BV7-40 Mk2 is the same I said for the BV7-32 Mk3, 7.84 and 7.74. If your TV works fine, I would not worry for a SW update.

Regards

how can I find out the SW version of my TV?

upgraded bs3(bv9) 10 days ago with sw. 5.08. everythings fine now...finally!

bulldog:

how can I find out the SW version of my TV?

MENU -> Options -> Press 'RED' followed by 'GO' -> Status Info      and voila

last version (on sept. 2009) is for BV7-40 MKIII and MKIV ist 6.11

ohhh hi there

what is contained within 6.11 from 5.08a???