Hi to All,

does anybody know the HexCode for the ‚LAMP’ (LIGHT:LAMP) command, which is unfortunately missing in the command list of the Beo5 config tool .

Knowing this HexCode and adding it to the file ‘IR Command table.xml’, I hope to enable this function on my Beo5.

Any suggestions/ideas?

Thanks in advance for Your help!

Hi Stefan, welcome to Beoworld.

Lamp amd Light are not missing from the config tool, I have the first firmware and software, and they are both in there.

Hi Jandyt,

I had a quick look in the command list and the only thing I could see is LIGHT:LIGHT. I could not see a LAMP command, where is it?

Cheers,
Frank

Hi Jandyt,

that's curious!

Meanwhile I have version 1.10, 1.30 and 2.20 and all are missing the LAMP command.

What version are You using?

Cheers

Stefan

Lacking any of the appropriate equipment, I don't know the command semantics, but anyway:

• pressing LIGHT on Beo4 sends 0x1b9b (17 bits)
• pressing LIST until LAMP is displayed sends 0x1b58
• pressing numbers in LAMP mode first sends 0x1b20, then 0x1b0? depending on the number (i.e two separate commands for each click)
  

Hope this makes at least some sense

Hi Mika,

thanks for Your input.

Is shows, that the LAMP command sends out the same IR code as the GOTO command.

And indead, using the GOTO command with Beo5 has the same result as the LAMP command on Beo4.

Thanks again

Stefan