Hi,

I have just got a BV10-40 and have a Panasonic DMR-BW 880 Blu-Ray recorder 500gb hard drive as the DVD player.

The PUC control on the BV10 has the Panasonic DMR-BW 550 (or similar) loaded. It also has the generic Panasonic control for a DVD player loaded as well. I can get most of the functions of the recorder to work but cannot for the life of me get the chapter forward/backward on the DVD part to work. I can use direct chapter selection with the numbers but it would be good if I can just jump forward / backwards with the up/down button.

If I change the PUC control to the generic Panasonic player the up/down button works fine.

I have a Beo 5 /Beo 4 and they both good in their own way. Probably the easiest is the Beo4.

Any hints or suggestions would be much appreciated.

Peter

Did you try the GO - UP, GO - DOWN, GO- LEFT, GO - RIGHT functions?

And maybe there is a PUC 2.0 for your Panasonic player. That might solve the problem using the new Beo4 navigation...(?)

Stefan

Hi Stefan,

Thanks for your help. Finally got it to work after seeing another post about using GO & Yellow button. In this case it's GO & Red for back and GO & Blue for forward.

Logical...... no, but at least it works.

Next step is the stand. It's been back for repair but still won't work on my TV. The stand had a short and I'm hoping it hasn't killed the stand control inside the TV.

The TV's aren't that portable to lug to the dealer.

Peter