hi all

just bought one of the above - tried it using 1000 remote - cannot work out how to use it to tune in tv stations - it came from another regional area - so quality of reception not good nor are stations registered

please help

salut

tony s (currently uk based)

Hi,

"Goto"- ">" and the MX will start searching channels.

"Store"-"number..."-"Store" will store it on a selected channel nummer

If you have to switch between tv-systems, press SHIFT + 3.

thanks guys now i appreciate the benefits of bno video - i've just had audio kit to this point - my tv cost 99p got to be a contender best buy stakes!

cheers

tony s

Another question - is this multi region ie secam /pal etc or just aimed at the uk market - ie pal?

thanks

tony s

The MX5000 supports colour system PAL B/G --  PAL-L and PAL-I for the UK as well as Secam for places like France as well as Type 3251 supporting NTSC A/V 4.43 MHz / 3.58 MHz

According to the MX5500 manual, the units sold in the UK are equipped to receive PAL I only.
and they are not equipped to receive the PAL/SECAM B/G or SECAM/L systems.

Thanks for the inf - my unit is a 3263 version  -  will try thr shift 3 when i get the chance to

again many thanks

tony s

If you would connect a Beocord VX5000/5500 to the MX 5500,
you could distribute audio&video to another room.

Have you connected the MX 5500 to one of your Beocenters ?
sound from tv through Beocenter-speakers, sound from Beocenter through tv-speakers.

not yet - need to make up some leads - previously used the bc's with an lg lcd screen and a grandin screen - the mx5500 will replace the lcd in the main viewing area - one bc in france 9300 = the other in uk - normally live at the french address with penta's - the uk uses wharfedale speakers

well pleased with both systems!

just need to locate a set of keystrokes for the 1000 remote to fully control the mx5500!

cheers

tony s