Du skal have BC9300 på værksted for at få det repareret, medmindre der er en venlig sjæl som privat kan reparere det. Beovox CX100 er da fine højtalere, men kantophænget kan være gået og det kræver enten montering af nyt kantophæng på de eksisterende enheder eller evt. nye enheder, hvis

Så vidt jeg ved, findes der stadig reservedele til BC9300. Så det skulle være muligt at få udskiftet CD-enheden og evt. betjeningspanelet. Til 500,00 kr. er der plads til at "ofre" lidt på dette udmærkede og flotte anlæg. Et brugt velfungerende BC9300 koster omkring 5.000,- - 6.000,- kr. BC9000/9500

The Beolab 9 is very fine for classical music and also other kinds of music. If the bass is to strong the speakers can be placed away from the corners and the back wall and settings set to "corner". They still have the deep bass (about 30 hz) and the upper bass (about 60 hz) is then lower.

BM 6000 kan via fjernbetjeningen betjene Beogram og Beocord og forskellige B&O (link)produkter. Er det muligt at tilslutte en Beogram CD (3500-5000 etc) til tape 1-indgangen og betjene cd-afspilleren via B&O fjernbetjeningen/terminalen eller er det kun via tape-2 indgangen med direkte betjening på cd-afspilleren, - f.eks Beogram CD-X.

Oh yes - many years ago I did own a Beomaster 6000 together with Beovox MC 120.2. This was a good match and the speakers did play as a dream for many years. Later on came Beolab Penta (3) and now it is Beolab 9. But sometimes I miss the "old sound"!

About 1 year ago I did need some replacement for my Beolab Penta 3. I did try Beolab 8000 + sub and Beolab 4000 + sub. I did end up with Beolab 9, - they are much better with a lot of power and you dont need the sub. By the way the Beolab 4000 + sub sounded better than Beolab 8000 + sub., but dont have the power of Beolab 9. I am using Beolab 9 together

Yes, - and the reapir is not for a home made "handyman".

My BS3000 did the same after about 4 years. There was only one thing to - repair shop - and a new CD-unit.

Maybe you should have ordered new midrange speakers from B&O. They still have them.

Many years ago I did have the LX4500 (same as LX5500) and I did use Beolab Penta III and I could see all informations on the display - VX5500/Beosystem7000 etc. As far as I remember there is some settings in the Beovision menu about int/ext loudspeakers. Maby there is something there?