|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi, I', having a problem with my Beocom 6000 where I am getting 'no signal' on the handset. It started as an intermittent problem and now is constant. I have had the base disconected overnight to see if that would clear it but no joy. Any thoughts on what could be causing this? Cheers, - D
-
I thik what your seeing is lots of first time B&O collectors coming into the market, just look at the growth of boeworld over the past 6 months! - D
-
Yes, it was left over veneer from the 1900 I used. Cheers, - D
-
Beolab 2/3 spheres would be a chalenge but I think if the grain was run horizontaly, it could be done without too much fuss. You're right, it would look cool. - D
-
Hi, I was just playing with some left over rosewood veneer and ended up veneering a remote ipod dock. Thought you'd enjoy the picks... http://forum.beoworld.org/members/DouglasM/files/DSC00294.JPG.aspx http://forum.beoworld.org/members/DouglasM/files/DSC00295.JPG.aspx
-
Easy enough to do and I was able to get 4R3 to 4.5 volts but I could only get 4R2 to 2.9 volts. Any suggestions?
-
I am thinking that this is going to be an easy fix but here goes... I have a 2400 which is tuning several mhz below where it should be; For example 100.4mhz tunes in at around 105mhz. normaly you would think it is the selector not aligned correctly with the actual tuner but this strange symptom also holds true for the presets! Any help greatly apreciated
-
Man, you are good! That did the trick... Cheers!!
-
Hi, Sorry if this has been answered before but after an exhaustive search, I came up with nothing. I have recently got a 2402 which has some eratic problems. Basically, when you have an lp, or 45, on the platter and press 'start' all is OK, pressing 'stop' does nothing and pressing 'pause' results in the arm raising but then
-
Hi, I've jsut got my first 4004 and have a couple of questions. First, is it a qiadraphonic table? I ask as I see that there is a '4 Chanel' light in the display. Also how is one suposed to set the speed as I see no strobe, only the adjustment wheels. Finaly, how do I center the turntable? I've looked in teh service manual and have successfuly
|
|
|