Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
wow! it seems to be a magnet detached from the external body. I don't have the spare part but often appears on ebay. Remeber that all B&O pieces are B&O. :) ciao ciao Eugenio
-
Could you post some images?
-
I don't know if this is possible, it seems that B&O has a similar interface (similar as functions, not as circuits project)... What does the moderator forum think about? The existing upgrade consist in one apple cable adapted to connect to the aux input
-
From the noise it seems that the motor "NOZZLE" is touching on the motor body. Check the motor. ciao ciao Eugenio
-
In this unit I used the aux input but studing an interface to send commands directly form Beocenter to Ipod using Tape Deck interface.
-
[View: http://www.youtube.com/user/MastroVintage?feature=mhee#p/u/0/NodHzm_KMuo :560:315] Just done!!!!!!!!!!!!
-
Hi and welcome. The red status means that the standby voltage is present, the change mode to green and then to red agai can have several causes, maybe a defective cap or a defective solder joint, or thousand other causes. :). U had this problem on a tv and the solution was to replace all caps on the mainboard, none was damaged but all was deeply out
-
Hello Tryed to translate in english but the result was dramatic :) So do you need the lower part of the spindle, right?
-
Hi Olivier The little white piece is the leverage that open/close the microswitch, so the servo system knows when stop the travel motor. I think your teory is right; you need to dismount the transport. sorry for the delay :) let me know ciaociao Eugenio
-
http://youtu.be/vShnxviyj3o