[quote user="beolife"] I have a Philips DTR220/05 freeview box , does anyone know if this is supported as I can not see it in the latest list posted. Will one of the other Philips models be similar? [/quote] Simon, Most Philips STB's use remotes which conform to protocol RC5 or RC6 which were originally developed by Philips. Have a look

A warm Welcome to Beoworld. Rather than use the Beolink Converter (1611) why not connect the Masterlink cable directly to the Beolab 3500 Have a look at my FAQ HERE to see how to set the Beolab 3500 to Masterlink

[quote user="joeyboygolf"]I am afraid that I do not know why you passive has no on/off indicator.[/quote] The most recent units do not have an off/on indicator.

I have started adding to the " Group " section of the forum items where there have been most requests recently normally via e-mail rather than on the forum itself. The latest update lists the currently available 3rd paty products in the PUC library. One area where there has been some apparent confusion is the STB-C vs. PUC which as most of

Well, in that case you may well be correct and a cable has become internally disconnected. You can see from the drawing below its not difficult to get to the masterlink module

Most company's use cables made by Belden

Siggi, Given your answers I think we need to take one step back and relook at the situation. Please confirm the following points are as I have stated below and provide answers where required:- You have checked the AVANT option setting, please confirm what you have set it too ? To check it, go into the Service Menu of the AVANT by pressing MENU on the

As you have an MX4002 in your bedroom, I don't see any other options available to you.

Siggi, Assuming that you have done all the basic checks and the AVANT and Ouverture are the ONLY products connected to the masterlink, in other words there is just ONE cable connecting the AVANT to the Ouverture AND; You know the Masterlink connection has previously worked in the AVANT then You could test the functions of the Ouvertire Masterlink by

With the Beo5 you could go into the service menu and set into "Dealer Mode" which will reduce the range of teh IR signal and you can also get a "cap" for the Beo4 which does the same function. To set the Beo5 to "Dealer Mode" do the following:- Press the RED (Standby) and centre GO at the same time Press the soft button