De eerste generatie van de 3000 heeft ook de kleine clamper gehad. Deze was/is softwarematig op te waarderen zodat hij ook gebruikt kan worden voor Netmusic etc. De 2300 is hier nooit geschikt voor geweest.

The linkfrequency has to be set in the BS2 and not in the BV3. Choose a free frequency (at least 9Mhz from any other) in the BS2 and switch the modulator to off or set it to a much higher frequency. A bit silly, but you have a coax cable from the rf out on the BS2 to the BV3 in?

So, by using AV + videosource gives you at least sound for the time being? What I would do is check for a free channel, which isn't used by the cableprovider. Just for sure, check both tuner systems, (B/G, I secam, etc.). Check if your modulator in the BS4 is set to "on" and to be sure, set the BV3 to "no" (press menu while standing

What happens when you use the A-Vaux instruction? But am I right that the Vaux is the HDR1 on the BS2? Normally the HDR1 is automatically recognized as Vtape or VMem (depends on the systemsoftware) at the BS2. Then you also have to use the Vtape or VMem instruction to start in the linkroom. Because the BV3 in option 6 (or5) , knows that he has to search

I think more information is needed. Are there speakers attached to the BV3 in the second living room? Have you checked your (speaker)settings in the BV3? Does your BS4 start to play i.e. cd when you ask for it in the second livingroom?

If have noticed that there are some slighty differences between the MKII and MKIII system 2. So check your version. About the "center" socket on your system. The mkIII has a "hardware" mono signal on both the left and the right pin 3 and 5 at the back. But the mkII has a somekind of modified mkI chassis where the stereosignal inside

Why have you set the BV3 to option 5? Option 6 will do the job either. Unless you have another audiomaster in the linkroom. About the BV4. If you having the mkII or III then audio can be set for video only to option 3 or 5, and for audio to 2 or 4. This can be done in the "speakermode" at the audiosetup.

Ik zou eerder de schoteltuner vervangen door een met een hardeschijf voor opnames. Dan kan de V8000 wieberen...

[quote user="Toubro"] , until I realized that my Avant does not have the PUC output [/quote] Isn't the RE-BL also on the latest STB-C list? It has the "ps3" for the Nyko for sure.

[quote user="bayerische"] My BV5 don't have BL5, I have it set to Beolab Penta. Works great. [/quote] Which software does your sound module (and chassis) have? Even the avant 32 RF DVD (8450 type mkII) had the "BL 5" option.