So if you have connected an audio source via masterlink to your BV 7-55 and you select Radio or CD, the motorstand should turn to the programmed audio position. My BV 7-40 does so, but only if the TV is switched on before to video.

[quote user="Razlaw"] I have never thought about that so I just tried it with my BV7-55. My stand never moves to the Audio position. [/quote] Did you program a different motorstand position for audio in the setup??

Hi all, on my BV 7-40 it is possible to program different positions for the motorstand (video, audio, standby). Normally the positions for audio and standby will be the same. I have programmed different motorstand position for audio and standby (for test purposes). When I choose an audio source from standby (Radio or CD), the BV 7-40 doesn´t turn

Lass Dir dann am besten die PUC-Tabellen für alle in Frage kommenden Receiver sowie auch für gängige Blueray-Player (z.B. Samsung) und z.B. für das Apple-TV und die Playstation aufspielen. Dann bist Du für die Zukunft gerüstet, falls Du z.B. mal ein Apple-TV anschließen möchtest.

Hallo Thomas, die PUC-Tabelle kann leider nur durch einen Händler upgedated werden, da hierzu Spezialsoftware und ein Anschlussadapter von B&O erforderlich sind. Gruß vom Räuber

Hi Karla, I had connected such a converter to my Avant and it worked perfectly. But I hoped I wouldn't need a converter with my new BV 7-40 3D at all, because the ATV 2 is connected via HDMI. But as mentioned the sound of the ATV is only distributed to link rooms and beolink passive if the BV 7 is switched on. So the ATV 2 must be also connected

In the service menue of my Avant there was an option "Avant type". There you can choose "Internal VCR" YES or NO. /Räuber

This solution would be more difficult than a small digital-to-analogue-converter between the ATV2 and the BV 7-40. I have already a beolink passive connected via Masterlink. At the beolink passive there are normal speaker cables connected which are leading to my outdoor terrace. When I want to hear music on my terrace via Airplay I have only to press

Hallo Thomas, klar geht das, Du musst nur einen Receiver wählen, für den es eine PUC-Tabelle gibt, die auf Deinem BV installiert werden muss. Bei der Konfiguration im Anschlussmenue wird dann eingestellt, mit welcher Taste der BV UND der Receiver eingeschaltet wird (z.B. SAT bzw. DTV). Alles total easy! Gruß vom Räuber

Hi muntbeoman, you are absolutely right, I have already a second ATV2 in my linkroom. I only wanted to discribe the issue with my linkroom. In real life I want to hear the sound of my ATV2 at BV 7-40 on my terrace. On my terrace I have passive speakers connected to a beolink passive. And of course I want to hear the sound via Airplay WITHOUT switching