Hi Menahem, This time it works ! It remains a little problem : the left channel is not so loud as the right channel I controlled all the solderings and all is ok. i controlled also the Pickup arm height and parallelism, and this was also good. But it doens't annoy me too much. It's great to sit and hear my favorite LP discs Many thanks for your

Hi Menahem, Yes it helps... But as i said in another Post, my cable doesn't have the same colors. So the "must" would be, ( I do not dare to ask for it), to check your Din plug, so we can be sure. Thanks Théo

Hi, Hi, Many thanks Menahem. That's what i need. But, all cables don't have the same wiring. I bought an official B&O audio cable (7 pins, with 2 i can unscrew) some months ago, and the colors are not all the same. I'll look at this next week-end, and i'll come back for the results. Thanks again Théo

Hi Menahem, i'm looking for some advice. For instance, wich wire from the Din plug goes to wich soldering place on the riaa pream. there are 6 soldering places and i don't know the real place for each wire. Thanks for your answer Théo

Hi, Thanks for your reply, but i knew this. My problem is where goes the yellow on the Riaa preamp, and the white, ..... on the riaa preamp, there are 6 soldering Thanks Theo

Hi all, I just noticed that the Riaa diagram in the "BG3000-700_service-eng.pdf" is not the right diagram. In my Beogram4500 (type 5951) , i have a Riaa Card with the reference 8005250C and in the Service manual, its a 8005269 As i have problems with my beogram actually, i need to know what the difference is. If someone could help with the

Hi all, No one has an idea of what comes out (in wich order) from an Riaa preamp located in some Beograms ? Thanks for your help Theo

Merci, je pensais que ça m'aiderait, mais c'est pas encore ça j'ai le son coté droit uniquement et la datalink ne marche pas non plus en fait ce qu'il me faudrait, c'est la sortie du préampli A+ Théo

Bonjour, J'ai un petit souci avec ma beogram 4500 : certaines soudures de la prise DIN terminale ont laché (à priori, mal fait par le précédent proprio) Aussi j'ai décidé de remplacer la cable complet. Seulement, je ne sais plus à quoi correspond chaque Pin de la prise DIN. Coté beogram

Hi Chris, I have it, but i down't really understand the diagram if someone could help http://theoz.free.fr/BG4500-diagram.jpg thanks Theo