On MX5500 it's channels 50,51,52,53 and 54, check that the scart connection is set to none On mx6-7000 it's 60,61,62,63 and 64 and option 5 or 6 if you have audio also, but if it's the mx6000 that you want to link up to the mx7000 you need a VCR to make the link signal.

Hdu har en bl1000 fjb. er v.tape2 = shift + v.tape Men det er jo nok en beo4 du har hvis du DVD knap på den kan du kalde den CDV istedet for V.tape2, ellers kan du ligge V.tape2 ind i list'en. Ved og trykke på "St.by" og "list" på samme tid, så der kommer til og stå "add" tryk "GO"

If you order an new it is Plasma Ready all new eyes is

I have use a car spay paint on electronic before works fine, take it apart and give it 3 layers, cover the top of the Ir receiver. I'm not sure you can use the bottoms after paint... if you don't make some some kind of seal (paint in this case) and water hits it, then you have water, cuber and current. and corroding only takes 2 min. before

Hi Set marker on Setup then "Red" "Red" "GO" there you find it under ADJUSTMENTS Check that Wss is ON also

Hej er apple'en tilsluttet med spdif (digital kabel tilslutted i A 1-4)? Hvis den er det og tv'et modtager et stereo signal på spdif, så vil tv'et automatisk skifte til "speaker 2". I hullet bag på BL 7-4 sidder en lille led der forstæller om den er tændt (grøn) eller slukket(rød). ellers

After you power on it takes 15 min. before the back lights is on 90% light, don't know have long it's takes before it's at 100%. but for the first 15 min it will be very dark in daylight, and if the room light doesn't hit the TV light sensor.

OK sorry but it needs an analog signal

Beolink wireless has been updated to SW 2,0 Now it's possible to connect most of B&O link TV's wireless to ml, no need for ml cable only the Ariel cable and don't need an Ir eye for bl3500 anymore. It's only possible to connect 1 unit pr wireless It won't work with beolink converter or BL video so no go for old mx and lx TV's

thy "GO" + "9" or the "GO"+ "STOP"