Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 8 of 10 (94 items) « First ... < Previous 6 7 8 9 10 Next >
  • Re: Speakers for the Beocenter 9500

    I agree, S45-2 sound nice in general and with BC9500. I have been using pairs of S45-2 and RL 60.2 with my BC9500 and and i like the sound very much. You get the warmth and deeper sound from S45-2 and RL60.2 supports with (imho) a bit clearer and brighter sound. I also tried RL60.2s with Beovox 3000s and the sound was even deeper and bolder! Too bad
    Posted to General Forum (Forum) by redfresnel on 09-06-2008
  • Re: Beoport with non-masterlink systems

    Umm, ok. Sounds a bit tricky, if not impossible. :) I think i'll forget the Beoport for now. Maybe some other time with another system. Thank you for you help anyway!
    Posted to General Forum (Forum) by redfresnel on 08-04-2008
  • Beoport with non-masterlink systems

    Hi again, I read previous posts on this matter but they didn't cover my questions completely and i wanted to be sure about all the details before heading to a local dealer, so here we go. :) I'm planning to connect my MacMini to BC9500 via Beoport. Since i am not able to control the Beoport from BC without Masterlink, do i benefit anything else
    Posted to General Forum (Forum) by redfresnel on 07-31-2008
  • Re: Humming with Beocenter 9500 & Beogram 9500

    Ok, i opened the casing and problem was with some parts of ground wiring touching other wires. The grounding wires were still attached to correct pin but as the peeled wires were not soldered completely to keep them in one bunch, some of the grounding wires were touching other pins as the din-cable twisted. I also noted that the connectors on BC9500
    Posted to General Forum (Forum) by redfresnel on 07-28-2008
  • Re: Humming with Beocenter 9500 & Beogram 9500

    No, it doesn't hum if i switch on to Phono with Beogram DIN disconnected, so that is propably the problem. I tried to move the connector a bit when it's connected but didn't make any difference on the humming so the wires inside the connector's casing could be completely loose. I'll open the connector and check the wirings.
    Posted to General Forum (Forum) by redfresnel on 07-25-2008
  • Humming with Beocenter 9500 & Beogram 9500

    Hello, Recently i have been facing this problem with my Beosystem 9500. Everytime i switch on to Phono, there is a loud humming (50hz?) coming from the speakers. The records play normally, but the humming takes over the music. The power supplied for Beocenter and Beogram are from the same source. In addition, when i press Stop on beocenter while the
    Posted to General Forum (Forum) by redfresnel on 07-22-2008
  • Re: Gold Membership

    Hi, Van! Sure, both cards are Visa Electrons. Thanks for your help! And no probs. :)
    Posted to General Forum (Forum) by redfresnel on 02-04-2008
  • Re: Gold Membership

    Hi there! I mentioned this problem in my previous post about other matters, but i still seem be unable to upgrade my membership. I have tried two different cards and checked my information several times and everyting seems to be correct to me. The system just says "Your order could not be completed, please check your details or try another card
    Posted to General Forum (Forum) by redfresnel on 02-04-2008
  • Re: Red BeoLab 8000

    Replied!
    Posted to General Forum (Forum) by redfresnel on 01-29-2008
  • Re: Red BeoLab 8000

    beodim: Tom: beologisch: they look really awfull in red [or any other color than alu for that matter] I don't agree. It depends on the interior. I have seen some red BL8000 and BL6000 that really look very good. I agree that alu suits most interiors, but other colors look good too. I have all black BL8000 and I am very happy not to have chosen the
    Posted to General Forum (Forum) by redfresnel on 01-29-2008
Page 8 of 10 (94 items) « First ... < Previous 6 7 8 9 10 Next >