I think it's not as easy as some say ! 1. Find a tv with volume adjusted line out, very rare and you lost surround a surround receiver with separate volume adjusted line out for each channel not cheap and you have to have add-on box tl bl2, change connectors on cables So my suggestion is to go for a used BV4/BS3 or BV7MKIII or newer if you want

I think you have to downgrade sw (The hole Build) to build 551 (H8sw 7.05) and then do upgrade to latest build 714 /Tompa

Hej, twix 6600 finns att välja i puc listan nu, så beställ en puc uppdatering /Tompa

Hi, then the connection issue come did you try to unplug tv from mains >40sek ? and then try manual again? If so, probely in earlier updates the dsm have been miss to uppdate so the "build" is incompatible , What Sw.ver has DSM Now ? /Tompa

I don't now price for it, but call your local B&O service for price /Tompa

Hi, Yes you need 2 cat5/7 for HDMI and 1 Cat 7 for ML Beovision supported are at this moment beosystem 3 based (BV7-40MKIII and later,BV4 with Bsys3,BV9) bv8,Bv10 Software uppdate maybe needed the models of Atlona that are in Puc support now is AT-ProHD44,48,88 maybe other model work depend on ir commands price depends on country, but you get a hint

No thats not right ! not so many CAT7 Matrix "brand" is not gefen it's ATLONA Ex 1. If you have the matrix ( ATLONA) in let's say livingroom were videomaster and sources is you need hdmi conection from each source to matrix and then 2 Cat 6/7 to each linkroom from matrix, depending on matrix model you can have 3 or 7 linkroom (1 output

I think you need hardware uppgrade, check in customer menu if IOP SW is below 23.00 (early BS3MK1 and BV9) if so, that is the problem and you have to change AVS/H8 module /Tompa

The MK 3 version does NOT have extra shielding but a separat digital earth wire (blue) for the icepower speakers But MK3 over 10 meters and all (MK2 fully mounted) have been replaced with a new one (MK4?)with extra shielding and a diameter of aprox 5,5 mm

Hi, The newest sw is 1.6 and it supports MLGW and And AUX source from main room i have find out that some new delivered beolink active is marked with sw 1.1 but have sw 1.6 inside !! maybe struer have label wrong only