Quite a large gap from 32 to 40. 37 somewhere in the LCD range would be a useful addition.

Yes. I did this by using the RF 2 output from a digibox (carrying off air signals/sat output) and joining the modulator output using a combiner before the distribution amp. RF output 1 connects to the "aerial in" on the TV. Works fine with an Avant so should with a BV7? PQ is excellent. Pleased I don't need more boxes and wires! Thanks

Thankyou for that Ian. So the RF amp offers "better quality" than the internal Avant RF modulator. My Avant setup offers perfect RF Picture Quality! I don't believe it could be improved! It seems nuisance value having another box/mains feed/more connections/brackets f-connectors and the additional cost of the RF link amplifier when I have

Hi Nick, Why did B&O not simply provide RF loop through to obviate the need for an RF link amplifier? Is there a built in RF modulator in the BV7 or is that also an external 'extra'? Thanks David

Can I assume the BV7 RF modulator works in exactly the same way as the one in the Avant? I have a Labgear distribution amp that provides a perfect picture to link TV's from an Avant. Does the BV7 need any further external boxes/wiring? If so, why?

I replaced an LX5500 with an Avant 32 and much prefer the landscape or 16:9 look of the LX. Room ceiling height is a determining factor. The Avant would IMHO still have the same 'picture on the wall' effect if it were 100mm lower yet be much less bulky and dominant in the room. The BV10-40 is far better proportioned although I can understand

Just bought an LX and it has fault on stereo sound from the tuner. Does anyone have a board destined for the tip? David

Does anyone have a new or working DVD drive for an 8453 Avant 32?

My mistake. I actually have Beosound 2 installed on the first computer. This obviously triggered the radio station download. Installed BS2 on the second computer and all is well. David

My Avant 32 DVD type 8453 has a fault. It will play a DVD or CD for 1-2 minutes and then stop. At that point I am unable to eject or play the disc.If the TV is switched to standby and powered up again I am able to play a disc (again for less than two minutes). There are TV error codes 0503 6C-1 (If that s any help) in the service menu. Any suggestions