Yes, I have the original remote. But I did not try the picture thing (need my RGB cable for the computer, haha) The other thing is the frame. I took off the frame from a BV4-42 dummy model. According to the BV service manual the frame is attached by lots of screws. I don't want to disassemble the whole Plasma, so thought I use double sided tape

edit: I took the RGB cable from my PC and installed it. Now it works perfectly!!

Hi, thank you for the answer! I just got the panel, it's a Panasonic TH-42PW6 commercial panel and was fairly cheap. it came with a separate tuner unit, but I don't want to use that thing. I connected everything to the Beosystem 2 (IR-Eye, DVD player, Sat. receiver and the speakers) and connected the panel with a RS232 cable to the Beosystem

I have a Beocom2 phone (MK1 from 2003) which hasn't been used for a while. the battery was flat so I replaced it. Now I wanted to register it to the base unit (old version) so I chose 'settings' in the menu and there should be 'advanced settings' and then 'register to base' - but the strange thing is that I there is no such

Hi Beoworlders! I recently acquired a used Beosystem2 (MK4, type 9425). Then I found a BeoVision 4-42 aluminium frame in nice condition. So, now I want make that stuff work and buy an used Panasonic Panel. So I saw a TY-WK42PR1 panel. Will it work with the Beosystem2 ? Or should I better look for another panel? Best Regards Marcel

Hi there, I finally found 2 Icepower 500A modules and now want to use them with my old Penta 2 speakers. it would be great if somebody could give me an advice how they should be mounted and what parts are needed to use them. I know they need a powersupply and of course they need to be connected between the beosystem and the beolab speakers. Marcel

Thank you Jonnie! @Hirthik HOLD is the same button as INT. (HOLD is only on US phones, INT on EU phones) Why not ask Lee to add this code to the item description in the products section (maybe as an author note)? Marcel

searched the forum for 2 days now but seems I cannot find one thread. it was about the buttons you have to press on a beocom 2 to get to the service menu. I want to know the production date, software version, etc. as far as I remember it was like *#9*9.....?? Marcel

look at this one if you want to see some b&o: http://derstandard.at/anzeiger/immoweb/Detail.aspx?InseratID=6079197# and here's the same house without fisheye lens: http://derstandard.at/anzeiger/immoweb/Detail.aspx?InseratID=6016507#

I am looking for a pair of speaker pole stands for my Redline 1000 speakers.