And now over to Norway.......

9 LEE: To create a forum, it needs what is called a 'Parent' forum if i remember correctly. This then allows you to create forums under the same 'Heading' or parent forum. The Parent Forum had to be the General Forum, and the General Forum is a forum within that. So, effectively - if we wanted a General Forum 2 or such like, right under

I would like one more forum under products forum. Because when you have a technical problem/question about a product from for example 1988, It will not fit on these listed below . Therefore you have to put it in the general forum, and your problem drowns in other fast changing post. Today we have: Beogram Have a specific BeoGram Record Deck related

Dillen: There are two types of Beovox S30 (6301/6317). What you describe is a common problem on the type 6301. The spider has loosened from the metal chassis. In some cases, where only a small part of the circumference has loosened, it can be glued back but in worse cases the woofer will have to be replaced. The tolerances between the magnet and coil

joeyboygolf: The first thing I would try is clean the laser lens with a cotton wool bud dipped in isopropanol or similar. Sounds like the laser is having trouble finding focus. I have done that, and it makes no different

Graeme: This sounds awful like the problem I have with my BC9000, its as if when cold it cant read the cd, and like you say, after about 15 - 20 attempts it reads and plays no problem after that. My BC9000 can also be very picky with what it plays, it does not like most cdr's, which I dont have many of anyway. I brought this up several times on

Is there any chance in getting service manual for either Beogram cd 3300 or the beogram cdx 2, I believe those two are allmost identical. Now is only 4 pages of schematics available on the 3300

Back to the main issue in this post. I am quite sure I am mounting the CD correct. The problem is as follows. 1. Since the player is in my week end house it is not played between sunday to friday (stand by). When I come and want to start it on fridays I must push play 10-15-20 times and it will go " P". then suddenly after a time it plays

j0hnbarker: I had a similar problem with my CDX, and it turned out I wasn't loading the CD correctly and it was slipping off the platter, so when I pressed play and the lid closed the hole in the CD wasn't lined up with the top of the spindle and the CD didn't spin. Oddly enough it was one CD that was more problematic than the rest. Have

Dillen: There are two types of Beovox S30 (6301/6317). What you describe is a common problem on the type 6301. The spider has loosened from the metal chassis. In some cases, where only a small part of the circumference has loosened, it can be glued back but in worse cases the woofer will have to be replaced. The tolerances between the magnet and coil