Hi what ISO shout I use if a'm to thy and take the photo??

HI the user manual, says it has to be higher then 2,1 to work whit VX5000, so i think thats the problem... thy and connect the VCR to MX3500 and see if it works fine!!! In option 6 Use "AV" and it will work (only AV + RADIO not AV + RADIO + AV)

oki lyder til dit tv har fået forkert SW på et tidspunkt i sit liv så, men du kan stadig væk bruge din beo4, med V-setup under list. MVH

I think it been sice 2004-5, the one for bl.pc2 is also used on the first BV4 Plasma...

I don't think you can do that, the cable for the eye is a special low capacity cable, comes in 5 and 15 m (15 and 90 feet I think). 5 wires.

your welcome good to heir it's an LX, I just remembered that an MX4500 can't be linked, "I think"... I Don't know the vx5000 that well... is the TV SW 2,1 or higher?

I have seen it work the way you have linked it, but like to know if the VCR is controlled by the scart cable or has its own Ir receiver

the option is right (MX4500-1 and MX3500-6) I don't know the vx5000 that well, if you pull the scart cable out can you then control the vcr by the remote (at the MX4500)?

OK you need to set channels 40,41,42,43,44 to the VCR freq. maybe 599, or start VCR and tune it in on it (mx3500). your TV (MX4500) and VCR may need a SW update to show anything else then vcr...

on MX3500 you need to use "AV" ex. "AV"+"Radio" and "AV"+"CD"