Claes, Whilst the PUC list in the GROUP section has not been updated since 9th May 2009 not that many additions have been made available to dealers. In the case of LG and Samsung, the GROUP list are the currently available library entries. It should be noted that there is a G-BDPXXX for Samsung which is a generic table which may well work with the BDP

If you look in the GROUP (menu button above) or HERE you will find the currently available boxes for the PUC For the STB-C in older Beovisions is also in the GROUP section and HERE

You said:- One more question: To use the PUC solution the Beovision and Philips DVDR have to be connected not only by a SCART but also with a PUC cable is that correct. Philips DVDR3460 doesn't have a PUC connector, I'm afraid. My Comment:- You connect your Philips DVDR via the SCART with a cable in the normal manner. The PUC sends converted

Jan, Nice job with the buttons, looks very good indeed. Paul, Any Samsung product can be controlled directly with the Beo5, but Samsung do use different product address codes meaning a created XML file for one Samsung product may work perfectly, but not work with a different model. With a Samsung product the only sure way is to capture the codes from

Mads, A very warm welcome to Beoworld.. Let me start by saying that no question is a stupid question, you just don't currently have the answer. The first thing to understand is that the Beo5 can control 3rd party products either DIRECTLY (i.e. not involving the Beovision TV) or by the PUC if your 3rd party product is available in the PUC library

Pim, Unfortunately, that is not possible using the PUC because of the port assignments.

Out of the more than 11,000 members 4446 have received the e-mail so far

Everything you have listed you wish to do with the Beo5 can be achieved. Assuming everything that you wish to control is in the same room, then the best way to setup the first screen is actually name the zones TV, DVD, Radio, Video, Light, volume up and down and standby and another TEMP zone where you actually produce the setup you want. Subsequently

There is in fact 9 pages available, however you cannot use page 9 because B&O uses it for hidden hard keys. So, it is possible to have eight pages in principle, however there are many commands which are hidden depending on configuration etc, so in theory you could get to 8 pages, but in practical terms you will be lucky to get beyond page 7 and

Errol, You cannot just add stImage=" fred " you have to define " fred " in the resources section at the begining of the file For example:- <resource> <image stName=" fred " stFile="Images\Button.bmp" /> </resource>