If your Beo5 has the earlier firmware, then the previous file will not work because of the Carrier Frequency which was changed from 2 to 5 digits. I have created a new file for your version of firmware which you can download HERE

I have converted the Logitech Harmony PS3 Adapter Pronto codes for you into a Beo5 XML file including digit and hard key assignments. You can download it HERE and then extract it to C:\ which will add it to the correct directory in the Beo5 Configuration Tool. Within the Beo5 Tool just drag-n-drop to your configuration as below

Mitsubishi use their own infra red protocol as do many airconditioning company's This means the Beo5 CAN control it, but you can only use RAW HEX image codes in the XML file. Assuming you have the Beo5 Configuration Tool, then I have produced a test XML file for you to test which you can download from HERE . Extract the ZIP to C:\ then the files

Out of the two products the Kathrein unit is the most difficult to create unless you can capture the codes because it apparently uses a totally unique protocol to anyone else. The Technisat should not really be a problem because as you can see from the Lintronic site this company uses Philips RC5 protocol and most SAT commands have an address of 80

Press your browser REFRESH button and you should now see the correct timing..

When you say RED colour, I assume you mean colour settings of the text ? The colours are RGB (0 - 255) and so any colour really can be defined. If you are saying that you have set the colour to stTextColor="255:0:0" and it shows up orange, then there is a fault.

To mute on the Beo5 you turn the volume wheel fast. I prefer to add a mute button to the Beo5 screen.

Claes, The following are the key issues resolved with the updates:- Black screen when recording Always have TV sound in link room No record-lock TV freezes in Timer menu No demute VGA settings get lost No sense on HDMI No sound for Timer Play Error in menu overlay Power management for PUC table (unstable IR-handling for STB) DVB-T ready and a list of

Sacarino, Let me see if I can answer your questions. I am assuming you used the latest release of the Lintronic software which allows you to creat an Beo5 XML directly from the timings. You may wish to use the XML Generator found on Beoworld and then you will not get those problems. See attached help file Generally speaking you would have a channel

You clearly have one of the very early Beovision 6-22's and considerable funationality was added, but not apparently effecting picture quality These are the key new functionalities: SW version 5.0 supports DVB-S functionality New cursor and changed menu layout Addition of a Wake Up Timer Stand By functionality in connection with turning off a STB