Velkommen til Beoworld ! Basenhederne har gummikanter og de holder fint. Delefiltrene har en skidt tendens til at udvikle dårlige forbindelser men at gå lodningerne igennem er forholdsvis hurtigt gjort. Lidt mere info kan findes her : http://www.beoworld.org/prod_details.asp?pid=655 og her : http://beocentral.com/beovoxrl35 Martin

In a message caught in the posting filter (but meant for public view) he has given us the ultimatum, that he would kill this website, call the australian PM as well as Nokia, NEC, BT, Vodafone and presumably also British Leyland and both NASA and LEGO headquarters and tell them that australians speak english if we don't remove all traces of his

No heat, just pull using controlled force. You are fighting a rubber ring that binds to the cabinets plastic bezel and the drivers metal chassis. Grab a part of the drivers metal basket chassis and put your thumb on the plastic surround and press hard and long. It will eventually give. On the S45, the plastic ring is an integral part of the front panel

The pole piece sits inside the coil and is glued to the inside of the end piece (3mm thick rear cover plate). The end piece is glued to one end of the magnet. The other end of the magnet is glued to the metal chassis (basket) of the driver. The glue hardens with age and becomes brittle. When the speaker is shipped or moved about with less than utmost

Naaah, det snakker vi lige lidt om. PM sendt. Martin

Søren, Det er nok ikke så nemt at finde nogle andre steder så dit tilbud lyder helt fint! PM mig venligst med detaljer om pris, porto osv. Martin

Jeg søger et par beslag til Beovox RL140 (passer vist også til andre modeller). Det skal være den del, der griber ind i den firkantede åbning på bagsiden og som passer på f.eks. gulv-stativer eller væg-ophæng. Alternativt et par komplette gulvstativer el. lign. Martin

I have - Tweeter (used, original, tested) - Capacitor kit - Plastic grills without cloth (used) - I can recloth them if needed. - One logo badge (another will turn up some time) The resistor doesn't look too bad in the photo, it may still be OK but if you can tell me the ohmic value stamped on it, I can probably also find one of them. Where are

Det kan godt være motoren. Prøv at afmontere pladetallerken og rem og drej så motoren med fingrene. Hvis motoren siger klik-lyden, har den ikke langt igen. Det er bronze-kontakterne indeni som slides mod kommutatoren. Hvis det ikke er motoren, som siger lyden, må du undersøge apparatet nærmere. Martin

Hvor i landet er den ? Martin