Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 70 of 98 (973 items) « First ... < Previous 68 69 70 71 72 Next > ... Last »
  • Re: Shot Beogram 4002 bearing?

    [quote user="joeyboygolf"] My 6000 clicks, which I think is the end stop microswitch deactivating! [/quote] Yes, but it doesn't click pressing "PLAY/START" in itself! Back to the topic, I read in a post or two that there should be a spring inside the bearing? Maybe around the recess at the bottom of the shaft? Jacques
    Posted to BeoGram (Forum) by chartz on 10-11-2010
  • Re: Beogram 4002 no arm movement

    [quote user="Dillen"] Don't know if you are aware that it's an IR LED. [/quote] Ah yes! It's because I saw all these posts on how to replace the bulb with a white LED, I was confused! And the service manual only says "LED"! Thanks Martin! Jacques
    Posted to BeoGram (Forum) by chartz on 10-10-2010
  • Re: Beogram 4002 no arm movement

    Hi, The LED in the carriage position circuit is good but it doesn't light up. The mechanical switch works. Any ideas? Is this related to the previous problem? I can't find any schematics for my deck (SN 054865) which makes it harder to comprehend! Jacques
    Posted to BeoGram (Forum) by chartz on 10-10-2010
  • Re: Beogram 4002 no arm movement

    Right then. 2N1711 2N2907 don't work at all here. The BC142/143 used here are audio drivers. I've ordered 2 of each. Jacques
    Posted to BeoGram (Forum) by chartz on 10-09-2010
  • Re: Beogram 4002 no arm movement

    Thanks Martin, I had got that... One hour later... Done! but no cigar... Same symptoms. Exactly. Jacques
    Posted to BeoGram (Forum) by chartz on 10-09-2010
  • Re: Beogram 4002 no arm movement

    No, voltage arrives at the first and second transistor (+21.8 v at collectors and +14 v or so at base of the first transistor) when I press 'play' but somehow never manages to power it through. No voltage at the emitter of the second transistor (metal), however tested good. The motor works normally when I press 'back' or 'stop'
    Posted to BeoGram (Forum) by chartz on 10-08-2010
  • Re: Beogram 4002 no arm movement

    I have tested the electronic switch: it is alright in all its functions.
    Posted to BeoGram (Forum) by chartz on 10-08-2010
  • Re: Beogram 4002 no arm movement

    Okay, the deck lights up when I press "play", the motor turns, but it stops as soon as I release the button. I will check the diodes and come back to you. Thanks
    Posted to BeoGram (Forum) by chartz on 10-08-2010
  • Re: Beogram 4002 no arm movement

    The transistors are all good... What next please? I have re-soldered everything and still nothing. I just don't get it. I've been studying the diagram (not that complicated on the paper!) but I can't find anything. By the way, my 4002 has some funny kind of phototransistor (in a transparent TO92!). Must be the ancestor of all this! Any ideas
    Posted to BeoGram (Forum) by chartz on 10-08-2010
  • Re: Beogram 4002 no arm movement

    Thank you for your time Martin! This is my board exactly. What equivalents do you advise? For instance, BC 547/557 for command, 2N 2222/2907 for power? (you guessed, I have them at hand!) Jacques
    Posted to BeoGram (Forum) by chartz on 10-08-2010
Page 70 of 98 (973 items) « First ... < Previous 68 69 70 71 72 Next > ... Last »