Based on your description it sounds like the Beolab 3500 is not receiving the audio signal for some reason. Prior to the unit stopping working had there been any changes to your configuration ? Do you have a Mark II version of the Beolab 3500 ?

The AVANT SCARTS support RGB and that is the best option, see connections

I have decoded your RAW signal and I can see that it is an NEC1 protocol which the Beo5/6 firmware supports directly without having to use RAW which is an image copy only. You could add the RAW for each number one after the other, but you would need to include a delay of at least 50ms between each number otherwise the receiver may not keep up with the

Räuber, Below is the mapping for the Beo4 Type # 1710

Ladies & Gentlemen, I am currently out of the UK in Dubai, but picked up this thread on my mobile and thought I would take the opportunity to expand on Lee's feedback to you earlier in this thread. Firstly, I want to offer my apologies to those members who have had problems posting in recent months, its not only been frustrating to you, but

At present the following 3rd party products are directly (meaning built in) supported:- Crestron AMX Control 4 LK/IHC, Schneider/LexControl and ELKO Lutron Grafik Eye (GRX) Lutron Grafix QS (QSE) Lutron Radio RA Lutron Radio RA2 Lutron Home Works Interactive Conson Concept XP (converter from RS 485 to RS 232 is needed) KNX compatible systems Either

Ralf, On a Beovision 3 it is only possible to access this menu if no pin code is set. You could go in and use the "Service Code" then deactivate it and when you reactivate it then you can add your new code. You can set the 12 hours service time by entering a 5 digit Service code which is 1 1 1 1 1 This gives 12 hours of full functionality

Dear Members, Allow me to fully explain the issue which first started showing up just over a year ago. Firstly, not all members will see the problem. The members most likely to see a problem are:- Those who have a posting total above about 3000 Those who post to long threads which have more than about 50 replies. When two or more members are trying

The Beo5/6 can control B&O Lutron Rania dual dimmers, in fact this is one of the 3rd party products which B&O do support DIRECTLY

Mirralph, If you mean a XML Beo5/6 configuration file, then one is attached to this posting in a ZIP file. Unzip the file to C:\ and it will automatically be placed in the correct directory of the Configuration Tool.