Thanks for your efforts, Keith, Well, I have the latest configurator software, and choose "code learn" and whatever button i press on the remote ( and I can see a red light blinking quickly on the Lintronic box so it is receiving something) first nothing happens at all and after a few seconds I get "FAILED" on top of the decoded

Hi Keith, I have upgraded my Lintronic now with the latest firmware and the new configurator, and the Apple TV can do, if not very fast..but faster scrolling! :-) However, my problems with the Motorola VIP-1920 persists. As you write, I also think it might be something wrong with the codes ( waiting for answer from Lintronic regarding that) I had another

Hi Stefan, I tried the other OPT settings as well, just to test and see if it worked as specified, all of a sudden the doors of the BC2300 started open again, when turning on the TV..hmm. Anyways, I cannot really place it away from the TV since my living room isn' t that big, so i guess I have to live with it.. I have now the BV-3 as the master

Thanks Stefan! Now everything look a bit more clear to me ! It make sense that all signals go through the BV3 (and the IR eye to the Lintronic) This configuration actually solves another little annoying glitch I had, the doors to the BC 2300 opened everytime I started the TV ! I will test again when I get home and let you know the result if I can control

Hi Stefan, When I did the OPT selection for the BV3 the red light blinked, so I believe it got the input. The 2300 did not react though, no blink on the red standby diod. I have both the BV3 and the 2300 in the same room beside eachother, and I found in the manual that the OPT should be 1 on both BV3 and BC 2300, so i tried that also, but still same

Hi Stefan! Thanks for your reply and suggestions. I have a 1611 BL converter and I tried the commands, also with and without the splitter..still the same thing…no go.. Regarding the fast scroll, I have those functions assigned in the Lintronic configurator, and I got confirmation from Michael at Lintronic that it would not work. But this was

Thanks Craig and Seanie! Regarding what happens when I turn CD or Radio on the BC2300, on the physical unit, the BV3 does not react at all. No green light, no turning into viewing position…nothing. But when I use the Beo4, all works perfectly. It's like the communication is only one way to the BC2300 from the BV3, at least from standby..

Hi Guys, I am amazed about the amount of knowledge and experienced that is shared in this forum! I'm learning something new every time when visiting and recently I have been following threads on how the OPT settings work. I am trying to understand how it works and also if it could solve some of the "glitches" i have in my setup. My setup

Hi Laursen and Elephant, Elephant, that sound like a great configuration you have there..! I actually am using 3 Lacie Big Disks ( all with RAID) that are connected through ethernet to my Airport Extreme router, which is also connected to my AppleTV 1st gen. I am using the ATV Flash sofware to configure my Lacie disks as NAS, for my ATV, works perfectly

Hej Olav, ISDN är inte kompatibelt med analog IP telefoni ( jag antar att du har en lösning via din Internet provider) Jag hade själv en Beocom 3 ISDN och letade efter en konverter eller liknande, men de som finns är som regel mycket dyra (20-30.000 Sek) och gjorda för att passa i företagsväxlar med många anknytningar