The Master 610 exists alright. Very similar to the Beomaster 900K but there are internal differences like no plug-in support for a stereo decoder in the first units and the Master 610 was not available without speakers as the later Beomaster 900 series (Beomaster 900M). It does not have the "STEREO AUTOMATIC" lettering on the dial either.

Gulvstativer: Martin

Beovox S80.2: Martin

Beovox S55: Martin

Sælges: Et par Beovox S55 og et par S80.2 Begge par er i palisander. Begge er nyligt refoam'et med nye skumkanter på de originale bas-enheder og nye dustcaps. Pæne og velfungerende. Teknisk i orden og med kun meget få og små brugs-mærker generelt, faktisk kun meget let hylde-slid under bunden. Et stof-panel mangler

Bil, Bolig og B&O. Jeg har ikke hørt den term før men den kunne da blive et godt slogan for B&O. Villa, Volvo og Vovhund har derimod været i brug i mange år. Martin

It's normally a slower wow. 3-4 times per second is more like a vibrato as you suggest and I would suspect the capstan itself, dirty or bent. Martin

Please note that not only the size but also elasticity needs to be correct. It's particularly important in these decks with motors using sintered bronze bearings and a sideways pull to the pulley. With a too low elasticity the poreus bearings will wear down at an alarming speed and new motors are no longer available. I've seen a couple of cases

Hej Peter, Tusind tak for tilbudet, men Søren har produceret et par til mig, som du kan se nederst på denne side : http://forum.beoworld.org/forums/t/36655.aspx?PageIndex=9 Martin

Thanks, Frede. I never thought of that and never had the problem either but I haven't done that many Beogram 1000's. I have noticed something else, though. I'm sure you and others have too. Symptoms are that the motor will either not start at all or it will start far too slow and only slowly gain speed. After 10-20 minutes of warming up