Knowing little about your B&O ML-System/setup I can only describe generally some possible problems and make some assumtions: You own a ML System and the BeoMaster is in a different room as your BeoPort Till now you used BeoPort to distribute NetMusic /NetRadio to your ML-System. In future this task should be done by your BeoMaster 5. As a first

Hi Tony, of course "A.Opt" "2" + "V.Opt" "2" is a work araund regarding the "A.Aux" issue of the BeoLink Converter The command goes "parallel" and directly to both units and it does not matter anymore the BL-Converter is blocking this command. BUT !!! All other comands like the digits for selecting

Not possible on BV8-32, not even with the newest SW (from the BV8 series only the 8-40 has this feature) Work around could be the Beo4-DTV, B&O Item 8053529, offering "DTV" "V.Aux" "V.Mem" instead of "TV" "DTV" "V.Mem" as buttons of the left column. "TV" is still available as

... go often awry ;-)

Addendum - Workaround: If you are not using one of your AV/SCART inputs (not very likely todays) you can connect your turntable/RIAA preamp like a camera (using a SCART <> 3x RCA Phono adaptor) and assign "V.Aux" to that input.

I configured a similar setup - MX4000IT SW 3.1 (+BLb4 conected) <> BeoLink Converter SW1.3 <> BSd 4 (updated to current SW = capable of timer recording / 8GB Card) and tested this config in both options: V.Opt 2 & A.Opt 0 as well as V.Opt 1 & A.Opt 1 MX4000 and, just for testing, an other MX7000 both "understand" "A

"A.AUX"+ "GO" on Beo4 corresponds to "SHIFT" + "RADIO" on a BL1000. Maybe the "ancient way" works for your setup MX6000 in "V.Opt" "2" <> BeoLink Converter <> BSd4 "A.Opt" "0"

... and an IR transmitter-cable (Set Top Box - Cable) ...

[quote user="Dave"] They didn't run the cables into the wall? why do no BV10's i've seen have the cables hidden?? [/quote] Sufficiently hidden ? :-)

Unfortunately there exist no Windows Vista and Win 7 drivers for BeoSond 2 You willl have to switch your BeoSound 2 to the "mass storage" or "iTunes" mode: - press ^ (arrow up) and << simultanously and !! KEEP THEM PRESSED DOWN !! - press GO twice - when BS 2 changes to iTunes mode you will get a beep (confirming the mode change