I use NiMh batteries in all applications remote / radio control systems - they hold charge better than Ni Cads and do not suffer recharge memory problems! I would recommend 'em Tony

Following an earlier comment Joeybo..... re environmentally friend laight bulbs - I recall the RNIB (Royal National Institute for the Blind) recently calling for the production of unfriendly light bulbs to continue as there have been an increase in accidents in the homes of partially sighted people occuring possibly in the warm up period or just as

Peter I also had a yacht similar to the right hand model when I was a sprog(about 2 years ago!) - Used to sail it on a purpose built lake(I think ) at Fleetwood again lots of walking but no wading as Interenational/Nation events were and in fact still are held there. In those long gone days steering was by vane - needed to be set up spotn on or very

No its loosely based on a Cedar Club(French home build design - Class M (Marblehead) - 1.20m x 2.40 m total height - 2.10 m above the waterline! T

Mine is of my first attempt at radio controlled yachting - the frenchies were aghast at my near enough is good enough attitude - hence the name of the boat Ca Suffira - That'll Do Sails extremely well - knocks spots off the as per plan french boats and it still conforms to Class regulations! Ha Hahhhhhhhh Tony

Sorry guys can't keep up tonight been a long day so bon soiree i'm off to my pit! I'll get the surprise tomorrow morning ie if I won or lost! salut t

Rather than relay the floors etc the French do a range of stonkin great jacks - may be easier to jack up the low side of the house! T

I know its an obvious thought but is there a misalignment of the front bar with the lower box section ie top edges lying flush with each other , or possibly one of the front feet buttons missing if the latter, i have turned some up in black nylon, slightly smaller in diam than the originals but they do work ok i can mail you 2 but will take about 5

Are you using a fully wired (8 core) mk2 cable to connect the passive to the sources?- i have recently been advised that is the one to use! tony

hi craig i have a similar problem with an mx stand - was under an mx7000 but have taken o0ff the tv mount and am using the stand and motor with an ali adapter plate to sit an ouverture on it this appears tolean to the right when facing the front of the stand - have toyed with the idea of shimming the turntable on the lower side to 'jack'it up