Many members have sent me e-mail's over the past two weeks (> 50 e-mails ) for which I have not had the opportunity to respond because I am currently on holiday in Australia. I have managed to answer about 25% to date, but if yours has not yet been answered, then apologies. You will get an answer, but it may not be until after Christmas as in

The prize draw clock has been corrected. It is no so much a bug, more that I was not around at prize draw time to change the setting. The countdown was actually showing the time until the November 2010 draw !!! You may need to do a browser refresh..

As others have stated there are different type numbers which relate to different countries normally. In the case of the Beosystem 3 there has been two versions:- The Mark 1 has type numbers 9600 to 9612 inclusive The Mark 2 version released in October 2008 has type numbers 9615 to 9628 inclusive The latest TV software version is 7.05

Frank, In your point 1 your XML file for the IPTV receiver will need to contain the complete functionality when using "sources3party" whilst I have not tested this in version 3.23, it was certainly true in previous versions. I suggest you upload a copy of your IPTV HERE to review and modify. In your second point if what you are saying is that

[quote user="burantek"]Possibly neither. Might you have a plasma TV in the vicinity? [/quote] Agreed, that was going to be my follow on question..

I understand that the cable lengths available are 1.8 metres, 3 metres, 5 metres and 10 metres

A Very Warm Welcome to Beoworld. Are you saying that both remotes have the same problem using the receiver you have replaced ?

I did not say that I am 100% sure that the PUC for the BD-P4600 can control the BD-P3600. What I said and showed was that the earlier P1200 and the P3600 use the same protocol, carrier frequency and almost the same commands, so it is reasonable to assume the P3600 does as well. It is unlikely (but not impossible) that a manufacturer would change the

It is NOT in the PUC library

Gary, I suggest you put the "Configuration.xml" file into a ZIP file or e-mail it to me. I will send you a PM with address