Ca paraît techniquement possible, vu que le Beosystem 3 pilote déjà des dalles 100Hz (la dalle du BV7...), et que la sortie vidéoprojecteur n'est qu'un clone de la sortie principale. Donc ok pour la sortie en 100/120Hz à priori. Par contre, j'ai plus de doute concernant l'entrée 100Hz : aucun

Non, ce n'est pas prévu pour ça, chaque téléphone est appairé d'origine avec sa base, ce n'est pas un standard ouvert comme le DECT des Beocom 2 et 6000.

Normally the only things you have to set are : -Audio output =HDMI (not optical/not analogue) -Audio output format=Linear PCM (not Bitstream) I'm not in front of my screen so I can't post you the exact menu term, but you should find them without difficulties when browsing the settings menu.

In a home setup, the issue is that you could not be in front of the TV : if you sit in front of such a screen you get a mixed image of the two sources... Not very interesting. If you display the same source on both directions, you get a viewable front image, that corrects the issue a little bit. But the other issue is that by using this system, the

Yes, as same chassis means same electronic, same upscaler... So we can not say that the picture of the BV10 will differ a lot from the BV8 concerning elements that are due to the processor. But the LCD screen may be different, the backlight also, and there will be a contrast screen, so theses elements will maybe add a better black level, and the maximum

Mine was also silent when put in a cabinet (I just tried that once in order to verify that I can change my TV furniture for a closed one, and everything was ok, when opened again, nothing was hot and the fans were turning at low speed). For some games, my PS3 can be hot and make some noise, but I've never had problems with movies, that's why

What version do you have? Mine is nearly silent, the fan are running, but at low speed (it's a recent 80gb version)

For upscaling of DVDs, I've never found better value for money than the PS3. If you plug a Nyko blu wave infrared key to it, you (normally) will be able to pilot it via the BV8 and Beo4, but you will still hae to switch the PS3 on/off manually or with a game controller.

Oui, le Beovision 6 "2009", c'est une coque connue avec beaucoup de changements à l'intérieur : l'électronique est héritée du BV8 40 (plateforme commune à la dernière version de la BV7 32, au BV6, au BV8 40 et au BV10).

C'est mal parti vu que le BV7 55 sera selon les dernières rumeurs assez proche du BV9 en prix alors qu'initialement on parlait plutôt d'à peine plus que le BV7 40... A voir! Mais la remarque de Chatolufsen est très juste : ils ne peuvent pas positionner le BV10 trop près du BV8 40... L'équation