Is it possible that the BL7000 interferes with the BL5000? Does it make any difference if you cover the BL7000?

Hallo, Ich habe es noch ein mal versucht. Ich habe die option AM wieder auf "x" gesetzt. Und jetzt kan ich von (zb) TV nach NMusic und NRadio umschalten. Ich kan leider noch immer nicht von PC nach NMusic oder NRadio umschalten. Denn habe ich wieder keine Musik... Und vorher war es möglich von PC nach NMusic um zu schalten.

Has it ever worked before?? I ask this question because a BV5 from 2002 is probably a mkI, which is (almost) the same as the Avant mkIII. These soundmodules where slightly different from the later ones. Another thing is, the sub is a dedicated output from the AC3 decoder/ic and not rerouted through the AV-board (14), like the left and rightchannel are

Just a thought. I think that perhaps you've connected the sub to the "centre" powerlink instead of the Sub. Both powerlinkconnectors are located in the middle section. Normally the centre powerlink at a BV5 isn't used but mayby the plastic cap has been removed? I've installed a BV9 ALT speaker into my BV5 and uses the centre powerlinksocket

Danke für deine Hilfe. Ich habe nur der BM5 ohne der BS5 und es ist mit der VGA/ML verbunden mit meinem BV5. Der BV5 ist in Option 2, und normalerweisse reagiert der BM5 auf der PC Command. Aber leider nicht (mehr) auf das NMusic or Nradio Command. Aber ich versuche es noch ein mal mit die einstellung "AM".

[quote user="musi1958"] Problem gelöst, das SW-Update hat die Optionseinstellung bei der Beosound5 verändert. Option wieder auf "0" gestellt und alles funktioniert wieder. Tip kam von meinem B&O Händler. [/quote] Seit dem letzte Update habe ich auch selbte Problem. Aber die Lösung hat bei mir nicht geklappt

[quote user="Toubro"] I like the BV9 because of the design, the better speaker and the BS3 you keep talking so warmly about, but I'm concerned if the screen will disappoint me. [/quote] I would (imho) definitely go for yhe BV9, for at least all the reasons you mention. With all respect to (owners of) the BV10, a BV 9 screen will not disappoint

No, I have just an ordinairy 5.1 setup Is the projector in the same room as the tv-panel? The BS3 has the speakerrole option. Then you can give your speakers a different function in different setup's (roles). Your rear speaker can be assigned as front and left as right etcetera. As good as I can reveal from the manual, the BS3 has 8 powerlink connections

If you have the original ir-eye, which comes with the BS2, then you should have active controlling contrast and brilliance. But probably only when the panel has been recognized as a real B&O panel. The MKII and mkIII differs from the mkI. The mkI doesn't have this feature. I've placed on youtube a small video which shows my BV5 with the

Hi Lotus1, I've noticed that you took some time to consider about the best solution for your situation. That's good. For me, I also want to connect several sources to the BV5. And by fitting a DVI module (with HDCP) and a component module into the screen itself, I can control these inputs just as easily as the other (scart)sources with the Beo4