Ok, point taken - will an expander work with an early mx5500 ie first software version or will it need a later sw chip - if it will anyone out there got one that is available? t

Hi all Need help I think - got an MX5500 trying to connect a V8000 vcr, DVD1, panasonic sat box and a set top box - I can get the system to sort of work, using av1 as sat setup anddvd1 plugged thro it however will not work on bl1000 or beo4 only by manual control ie on box the vcr is plugged thro the settop unit and again only by manual control I've

Thanks Gerd - close inspection of the plug revealed the numbering sequence or non sequence - about to go and restick it all together ! salut t

Thanks for that Andy - no I hadn't found it - however, I want info on the other end ie the din plug, I have the eye wired with a 5 core cable and a cut end where it 'd plug into the ml/mcl, passive etc Thought one of the techies might have helped! Bonne weekend - misty here in Nth Worcs! Tony

try iconic av or lee's site both uk based tony

The above was for a standard turntable mech i do not know if its the same for an AV9000!! t

Hi Alex Just split a knackered turntable from its lead (i need the t/table for another project ) just opened the din plug colours as follows when viewing from pin side ie not under plastic cover and starting at the left hand side pin of the 2 diametrically opposite ie pin 1 9 o clock: pin 2 about 11 o clock: 3 1 o clock: pin 4 3 o clock pin 1 bare pin

quick question anyone give me the wiring layout for the din plug on the end of the ir eye cable ie the solder side connections - been looking around the site for the info but can't find it cheers tony

Isn't it funny that some folk rake in sh1t and come up smelling of roses - I just seem to spend my time wading through it! I stand accused of talking a lot of it most of the time!! Goodluck to all ce soir French Tony

got em on ebay @ 5 for £5 inc p&p however think i'm down bridgend first weekend in april if thats any use pm me tony